大乐透字谜

Welcome to the official website of Zhongshan Shengchi Electronic Technology Co., Ltd.
 Electromagnetic heating stove Hotline
Contact information

Zhongshan Shengchi Electronic Technology Co., Ltd.

Tel: 13420017772

Fax: 0760-88333851

Website: kyksldc.cn

Q Q: Click here to send me a message.

Your current location: Home Page Chinese style News Center Chinese style Company dynamics Seven things that must be paid attention to when using an electromagnetic heating stove.

Seven things that must be paid attention to when using an electromagnetic heating stove.

Author: Zhongshan Shengchi Electronic Technology Co., Ltd.: company dynamic release: 2020-05-07 03:16:37 reading: (65)
Abstract: Electromagnetic heating furnace must pay special attention to the seven things for everyone to introduce in detail. The settlement environment of the main engine of 1 and electromagnetic heating stove should not be less than -20 C, not higher than 50 C, and should be dry and circulated.
 Shuiyin-3e7d3

Electromagnetic heating furnace must pay special attention to the seven things for everyone to introduce in detail.
1. The settlement environment of the electromagnetic heating furnace main engine should not be less than -20 C, not higher than 50 C, and should be dry and circulated. 2, connect to switch power supply before: ensure electricity

The total output power required by the gas operation and the total capacity of the power transformer are not higher than the total capacity of the switching power supply, so as not to destroy the switching power supply as far as possible; otherwise, it should be divided into two parts.

Identify single phase 220V and three phase 380V working voltage, not m. Disconnect, pay special attention to the voltage level of the power grid under normal circumstances, 10% of the voltage level.

The rise and fall above. Avoid the use of large power electromagnetic heating furnace equipment. Electromagnetic induction heating furnace. 3. The electromagnetic heating stove is afraid of water.

Under normal circumstances, the electromagnetic heating stove can not get into the water, under all circumstances must avoid such things, water vapor, environmental humidity can not be overweight.

The electromagnetic heating line is also afraid of water, absolutely can not wet hand touch or put wet clothes on the electromagnetic heating stove, G line and so on. 4. There should be no PCB around.

Plastics, vinyl and polystyrene foam (other than antistatic). Electrostatic induction destroys the power supply circuit. Do not touch the control interface board or control.

The IC power supply circuit of the board. 5, the surface of the electromagnetic heating furnace line is asbestos material, and is afraid of grinding. Therefore, the electromagnetic heating line should avoid mixing and violent machines.

Equipment to avoid leakage of electromagnetic heating furnace, touch the metal material block of the grounding device, and then touch the control panel with your hand before removing the static body.

Electric induction (closing the switch power of the control panel). The grounding device should be maintained when touching the control panel. 6, all machines or equipment must be replaced.

It was cut off before it was carried out in the future. Do not touch the components or conductors on the printed circuit board with your hands or conductors. 7, replace machine equipment and overhaul machine equipment.

All links must be cut off before they can be carried out.

Share to:
 中彩网投注为什么不花钱 567彩票 下载 mg5523vip 北斗棋牌全部版本 11选5平台 S中彩票妙招 下载星云娱乐斗地主 乐彩3d论坛手机17500 3d172前后关系 5933cc彩票在线