大乐透字谜

Welcome to the official website of Zhongshan Shengchi Electronic Technology Co., Ltd.
 Electromagnetic heating stove Hotline
Contact information

Zhongshan Shengchi Electronic Technology Co., Ltd.

Tel: 13420017772

Fax: 0760-88333851

Website: kyksldc.cn

Q Q: Click here to send me a message.

Your current location: Home Page Chinese style News Center Chinese style Industry dynamics The reason why the coil temperature is too high during the use of electromagnetic induction heater

The reason why the coil temperature is too high during the use of electromagnetic induction heater

Author: Zhongshan Shengchi Electronic Technology Co., Ltd.: industry dynamic release: 2020-05-18 01:49:28 reading: (47)
Abstract: 1. The wire diameter of the high temperature cable which is equipped with the electromagnetic heating device of the electromagnetic heater and the electromagnetic heating controller with small diameter and different power is different, because the quantity to be conveyed is different. If the channel is too narrow and the carrying capacity of the unit space exceeds its own capacity, the heat emitted will naturally be higher than normal. 2. In order to give full play to the insulation and heat insulation effect of the insulation cotton, the thickness of the insulation cotton is usually about 15-25mm. If the thickness is too small, the heat loss of the cylinder will be much larger, and the temperature of the high temperature cable will also be high. On the contrary, if the insulation cotton is thicker, the electromagnetic induction effect of the high temperature cable will be affected, resulting in the low conversion rate and the efficiency of the equipment. 3. Coil winding of electromagnetic heater is less electromagnetic.
 Weixinjietu_ Twenty trillion and two hundred billion four hundred and twenty-nine million one hundred and fourteen thousand three hundred and fifteen

1. The high temperature cable diameter of the electromagnetic heater is small.
Different power of the electromagnetic heating controller equipped with high temperature cable diameter is different, because the amount of transmission is different, if the channel is too narrow, the carrying capacity of the unit space exceeds its own capacity, the heat will naturally be higher than normal.
 
 
2. The heat insulation cotton thin of electromagnetic heating controller.
In order to give full play to the insulation and heat insulation effect of thermal insulation cotton, the thickness of insulation cotton is usually about 15-25mm. If the thickness is too small, the heat loss of the cylinder will be excessive. The temperature of the high temperature cable will also be high. On the contrary, if the insulation cotton is thicker, the electromagnetic induction effect of the high temperature wire cable will be affected, resulting in the low conversion rate of electric heating and the efficiency of the equipment.
 
 
3. Coil winding of electromagnetic heater is few.
The coil number of the surface coil of the electromagnetic heater is directly proportional to the size of the inductance. If the coil is small, the inductance is also small. Then, the electromagnetic heating controller will output more electric current to achieve the effect of heating. The high temperature cable will carry more and more heat.
 
Conclusion:
 
The reason why the coil temperature is too high in the use of electromagnetic induction heater is mainly the three points above. These three points also need attention when installing the electromagnetic heater. In order to ensure the more efficient use of the equipment, attention should be paid to the details.
Share to:
 中彩网投注为什么不花钱 567彩票 下载 mg5523vip 北斗棋牌全部版本 11选5平台 S中彩票妙招 下载星云娱乐斗地主 乐彩3d论坛手机17500 3d172前后关系 5933cc彩票在线